排列3奇偶分析

 
          Dryingequipment
          Mixingequipment
          Crushingequipment
          Granulatingequip
          Transportatione
Your current position:Home > Article > How is the particles in the drying equipment is movement
How is the particles in the drying equipment is movement
 
pubdate:2015-09-18 Browse number:537 次

If we understand how dry particles inside the equipment movement can better understand how drying equipment drying materials.
First of all, is used to dry heat flows from the bottom of drum direction into the drum inside, along a straight line along the wall with the rotation of the drum rotation to rise. When up to contact with materials will be heated for the material, because the material before they encounter the heat flow due to the rotation of the rotor blades was crushed, so when a stream of shredded material, after the material heating can also drive the material at the same time, makes the material being blown, don't stick together, heating area is larger, more likely to be dry.
Then, the heat flow with the water moisture from the air outlet of the exhaust out, new heat ?
 


Changzhou YunPeng Machinery Co., Ltd.ProvideEfficient boiling dryer,JYS series blade dryer,ZPG rake type vacuum drier,Casein for efficient boiling dryer,Three iodine isophthalic boiling drierAnd other products
Copyright◎2015CHANGZHOU YUNPENG MACHINERY CO.,LTD. All Copy Right 2005-2010 ICP: Technical support:
Url:http://adamwisz.com/english/ 地址:changzhou zheng lu town three river industrial development zone login
 
点击这里给我发消息
Tel:
0519-88679987
Mobile:
13861058501